Wooden Teak Wine Rack 300 Bottles Bullhead City 300 details visit
03/20/2012
I have a commercial wine rack that can each display up to 60 different wines. There's also storage room behind each wine displayed for 4-5 additional bottles, so in total each rack can store about 300 wines.
This type of unit is perfect for a retail wine
shop. Units are made of hard wood which can be stained or painted if required. Dimensions are approx 4ft wide by 7ft high and 20 inches deep. Looking for $300, if interested call Toby at 928-201-2987.
Location: Bullhead City
it's NOT ok to contact this poster with services or other commercial interests
Bakers Wine Rack Gold Metal Granite Nw 200 details visit
03/19/2012
702-283-1845 local cash buyers only...
Location: nw
it's NOT ok to contact this poster with services or other commercial interests
27 Bottle Vintageview Wine Rack Platinum Series Nickel Finish Ws33 P S Eastern Amp Horizon Ridge Pkwy 70 details visit
03/18/2012
30 available
( I also have matching (3) 9 Bottle VintageView Presentation Wine Rack WS-PR-P & (3) 18 Magnum Bottle VintageView Wine Rack MAG2-P )
$70.00 / each (regularly $80.00 + shipping & tax)
New:
Purchased for a custom home but owner decid
ed to not have a wine cellar.
A brand-new, unused, unopened, undamaged item in its original packaging
Platinum Series:
Brushed, nickel plated and sprayed with a clear coat for a finish resembling a brushed stainless steel
- Holds 3 bottles in each row for a total of 27 bottles
- Durable steel construction
- Mounts easily to almost any wall surface
- Easy to install
Specifications:
• Bottle Capacity: 27 (9 Rows x 3 Bottle Deep)
• Dimensions: 36"H x 8.5"D
• Find the right bottle quickly
• Creates a gallery of wine label artwork
• Costs less than custom racking systems
• Scalable capacity - holds as little as a few bottles and up to many thousand
• Fits where no other wine storage system will
• Easy to Install
• Each rack contains: 1 base (heel) strip, 1 neck strip, and end caps on wall strip, 1 connector for stacking mounting hole covers and soft plastic rod tips
• These racks can be cut to any length or stacked on top of each other. Call us at 1-800-710-9939 for custom cutting.
• These racks are desgined to be attached to a wall or Floor to Ceiling Frame (FCF).
• Allow 2" above the top of the wall strip to make adequate room for the top bottle on the rack
• There are six pre-drilled mounting holes for fasteners on each set of racks, three holes per side - neck and base. Each fastener must support less than 20 pounds, of which most is in shear force (vertical pressure down on the wall). The top fastener has the most pull out force (horizontal pressure away from the wall). When installing wall strips always make sure the top fastener is solid.
• Recommended Fasteners for Installation
1. Wood: Wood #8 x 2" wood screw
2. Drywall over plywood: Drywall over plywood #8 x 1 1/2" wood screw
3. Drywall: Drywall spiral insert (e.g. E-Z Ancor), Toggle bolt or Molly for top hole
4. Concrete: Concrete 3/16" x 1 3/4" Masonry screw (e.g. Tapcon)
Call or Text 702-812-3883 or email to this listing
Location: S. Eastern & Horizon Ridge Pkwy
it's NOT ok to contact this poster with services or other commercial interests
9 Bottle Vintageview Presentation Wine Rack Platinum Series Ws Pr P S Eastern Amp Horizon Ridge Pkwy 60 details visit
03/18/2012
3 available
( I also have matching (30) 27 Bottle Vintage View Wine Rack - Platinum Series - Nickel Finish WS33-P & (3) 18 Magnum Bottle Vintage View Wine Rack MAG2-P)
$60.00 / each (regularly $75.00 + shipping & tax)
New:
Purchased for a custom
home but owner decided to not have a wine cellar.
A brand-new, unused, unopened, undamaged item in its original packaging
Platinum Series:
brushed, nickel plated and sprayed with a clear coat for a finish resembling a brushed stainless steel
Product Description:
Increased air flow and visual assessment of bottles are both positive assets of this unique racking. Stores your bottle label-out for easy identification.
- Durable steel construction
- Mounts easily to almost any wall surface
- Easy to install
The innovative design of Vintage View wine racks allow you to display the labels on your wine bottles while maintaining a proper storage position. Vintage View wine racks also provide excellent airflow for long-term storage and display of your favorite wines. Available in three durable finishes to work with virtually any decor and backed by a lifetime guarantee, Vintage View wine racks are the perfect fit for your wine collection!
Specifications:
• Bottle Capacity: 9
• Dimensions: 39"W x 15"D"
• Find the right bottle quickly
• Creates a gallery of wine label artwork
• Costs less than custom racking systems
• Scalable capacity - holds as little as a few bottles and up to many thousand
• Fits where no other wine storage system will
• Easy to Install
• Each rack contains: 1 base (heel) strip, 1 neck strip, and end caps on wall strip, 1 connector for stacking mounting hole covers and soft plastic rod tips
• These racks can be cut to any length or stacked on top of each other. Call us at 1-800-710-9939 for custom cutting.
• These racks are desgined to be attached to a wall or Floor to Ceiling Frame (FCF).
• Allow 2" above the top of the wall strip to make adequate room for the top bottle on the rack
• There are six pre-drilled mounting holes for fasteners on each set of racks, three holes per side - neck and base. Each fastener must support less than 20 pounds, of which most is in shear force (vertical pressure down on the wall). The top fastener has the most pull out force (horizontal pressure away from the wall). When installing wall strips always make sure the top fastener is solid.
• Recommended Fasteners for Installation
1. Wood: Wood #8 x 2" wood screw
2. Drywall over plywood: Drywall over plywood #8 x 1 1/2" wood screw
3. Drywall: Drywall spiral insert (e.g. E-Z Ancor), Toggle bolt or Molly for top hole
4. Concrete: Concrete 3/16" x 1 3/4" Masonry screw (e.g. Tapcon)
Call or Text 702-812-3883 or email to this listing
Location: S. Eastern & Horizon Ridge Pkwy
it's NOT ok to contact this poster with services or other commercial interests
18 Magnum Bottle Vintageview Wine Rack Platinum Series Nickel Mag2 S Eastern Amp Horizon Ridge Pkwy 75 details visit
03/18/2012
3 available
( I also have matching (30) 27 Bottle Vintage View Wine Rack - Platinum Series - Nickel Finish WS33-P & (3) 9 Bottle VintageView Presentation Wine Rack WS-PR-P
$75.00 / each (regularly $98.00 + shipping & tax)
New:
Purchased for a cu
stom home but owner decided to not have a wine cellar.
A brand-new, unused, unopened, undamaged item in its original packaging
Platinum Series:
brushed, nickel plated and sprayed with a clear coat for a finish resembling a brushed stainless steel
Product Description:
Increased air flow and visual assessment of bottles are both positive assets of this unique racking. Stores your bottle label-out for easy identification. Holds 2 bottles per row for a total of 18. Decorative, flexible metal racking. Install multiple units to create a whole wall of racking.
- Holds 2 bottles in each row for a total of 18 bottles
- Durable steel construction
- Mounts easily to almost any wall surface
- Easy to install
The innovative design of Vintage View wine racks allow you to display the labels on your wine bottles while maintaining a proper storage position. Vintage View wine racks also provide excellent airflow for long-term storage and display of your favorite wines. Available in three durable finishes to work with virtually any decor and backed by a lifetime guarantee, Vintage View wine racks are the perfect fit for your wine collection!
Specifications:
• Magnum / Champagne Bottle Capacity: 18 (9 Rows x 2 Bottle Deep)
• Dimensions: 3' 9" H x 10"D
• Find the right bottle quickly
• Creates a gallery of wine label artwork
• Costs less than custom racking systems
• Scalable capacity - holds as little as a few bottles and up to many thousand
• Fits where no other wine storage system will
• Easy to Install
• Each rack contains: 1 base (heel) strip, 1 neck strip, and end caps on wall strip, 1 connector for stacking mounting hole covers and soft plastic rod tips
• These racks can be cut to any length or stacked on top of each other. Call us at 1-800-710-9939 for custom cutting.
• These racks are desgined to be attached to a wall or Floor to Ceiling Frame (FCF).
• Allow 2" above the top of the wall strip to make adequate room for the top bottle on the rack
• There are six pre-drilled mounting holes for fasteners on each set of racks, three holes per side - neck and base. Each fastener must support less than 20 pounds, of which most is in shear force (vertical pressure down on the wall). The top fastener has the most pull out force (horizontal pressure away from the wall). When installing wall strips always make sure the top fastener is solid.
• Recommended Fasteners for Installation
1. Wood: Wood #8 x 2" wood screw
2. Drywall over plywood: Drywall over plywood #8 x 1 1/2" wood screw
3. Drywall: Drywall spiral insert (e.g. E-Z Ancor), Toggle bolt or Molly for top hole
4. Concrete: Concrete 3/16" x 1 3/4" Masonry screw (e.g. Tapcon)
Call or Text 702-812-3883 or email to this listing
Location: S. Eastern & Horizon Ridge Pkwy
it's NOT ok to contact this poster with services or other commercial interests
Nice Sturdy Wine Rack Palm Harbor 95 details visit
03/18/2012
NICE STURDY WINE RACK 18 X 36 X 74 CALL ERNIE AT 727-644-3625
Location: PALM HARBOR
it's NOT ok to contact this poster with services or other commercial interests
5 |
subscribe to wall mounted wine racks in lasvegas